Thingiverse
OpenSCAD Pirate Ship
di MakerBlock
1.5k
Download
1.3k
Likes
51
Makes
A printable OpenSCAD pirate ship. While it will definitely require support for the bow, the rest of the model should not. The OpenSCAD code isn't commented at all, so it may be difficult to follow.
There are two main parameters - "shipscale" and "th." The first parameter "shipscale" is the size the entire ship is based on. It roughly corresponds to the overall height of the model. The second parameter "th" refers to the thickness of many of the features. The STL below has the thickness set to 0.6mm. It should probably be about 1mm or so for optimal printability.
This ship features three masts with three sails each, a rudder, deck, captain's quarters, bow, and crow's nest.
As an FYI, this pirate ship was made with just "cubes" and "cylinders."
There are two main parameters - "shipscale" and "th." The first parameter "shipscale" is the size the entire ship is based on. It roughly corresponds to the overall height of the model. The second parameter "th" refers to the thickness of many of the features. The STL below has the thickness set to 0.6mm. It should probably be about 1mm or so for optimal printability.
This ship features three masts with three sails each, a rudder, deck, captain's quarters, bow, and crow's nest.
As an FYI, this pirate ship was made with just "cubes" and "cylinders."
MakerBlock pubblica anche su
193 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
