OpenSCAD RC Car Project

This is a kit for building an RC Car. This is a variation of my design at https://www.thingiverse.com/thing:7326362, where parts are provided for front wheel steering as would be normal for a car. It also leverages OpenSCAD files from some of my other projects that can be configured to generate needed STL files. You can use the OpenSCAD files provided to generate parts that might better suit your needs.

The printed parts include:

- Chassis, which you may choose to modify or replace to suit your needs
- Two motor mounts, you may need to configure for specific motors
- Four 20mm radius wheels and tires to connect to the motor shafts
- Front steering components, which allow the car to be steered by a micro servo.
- Mounting brackets that screw onto chassis to hold things, depending on your needs and you might design your own

When selecting a motor, try to find one that has a shaft of 10mm and at least 2mm diameter. You may need to run a small drill bit through the rear wheels so that t