OpenWoodshop - Chisel Plane V1

A 3D-printable plane for woodworking designed to take 3/4", 1/2", and 1/4" chisels. Depth of cut is adjusted by hammering the end of the chisel to extend, or the body of the print to retract. A straight groove can be cut by running this plane alongside a straight edge or fence (a clamped-down, straight piece of wood will do).

To be used with M3 screws and nuts, 12mm or longer. Designed for the Stanley and Irwin chisels, but should theoretically fit any standard chisel. A left-handed version can be printed by mirroring the model in the slicing software.

This design is a work-in-progress (WIP). Feedback is completely welcomed!

//////////////////////////
**UPDATE LOG**
***V1.5: ***
Implemented various sizes of chisel. Improved fillets for softer edges. Improved 3D-printability by limiting fillet on printbed-side to be no steeper than 45 degrees.
***V1.3-1.4:***
Reworked CAD logic to accommodate different chisel sizes for same design.
***V1.2:***
Included mounting slots for M3 hex nuts