Openz jdpancar v1

I took ideas and modified the cad from several designers and added a little of my own ideas to it.

the idea was to use what i had laying around. i had old miniz's, xmods, and propulse. just some old parts. lots of left over screws, a couple diffs, and lots of tires and wheels. so i downloaded and printed openz cars from rockracer, garuo3d, byebyeracing, and "make it rc". then took the chassis that i had the most stuff that fit and modified till i was happy. several test cars and broken pieces later and this is V1.

i designed the parts extra thick so even if you have a 3d printer that is not so great or can just not get good prints this should print fine. the other thing is that you can use just about any screws and hardware to make it work. the screw wholes are designed at 2mm but with all the extra material you just need to cut it with a tap, drill it out, or use wood/plastic screws. you can use printed wheels or miniz. there is only 15 screws and 2 axles. i pulled the axle ou