Optical illusion hueforge

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA PolyLite White Transmission Distance: 9This print uses 2 unique filamentsSwap Instructions: Start with BlackBorder Only Colors from here until the end. At layer #5 (0.72mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #16 (2.48mm) swap to Black for the rest.