Orange PI Zero NAS

As I wrote in another thing (https://www.thingiverse.com/thing:2584248), I did like the original design quite much so I decided to stick to it in other projects.
In a recent shopping spree at Aliexpress, I aquired an OrangePI Zero NAS expansion board which basically adds a SATA port, two USBs and an mSATA slot to the OrangePI Zero. One shouldn't expect too much performance-wise since the SATA and mSATA are still connected to the OrangePI's USB2 ports. It makes however for a nice little fileserver e.g. as a backup for an existing NAS. OpenMediaVault 3 runs quite well on it.
In order to build this you would need:
-OrangePI Zero original (the one with the H2+ processor and 100MBit Ethernet, the "plus" version is still quite beta)
-OrangePI Zero NAS expansion board
-At least 8GB uSDHC (the faster and bigger, the better)
-mSATA drive if desired
-2.5" SATA drive if desired (would need an additional SATA/Power cable)
-Case mount uUSB socket with cable and uUSB plug
-Case mount USB A