OrangePi Zero3 CASE +exp.board +alu. cooling frame

This is an enclosure for the Orange Pi Zero 3 with expansion card and aluminium cooling frame (affiliate link).I have assumed that it will be mounted vertically, the cooling holes between the walls on which the expansion slots are mounted.The model is prepared for printing with a 0.6 nozzle but can also be printed with a 0.4 nozzle with ARACHNE switched on.To mount the Orange Pi Zero 3 in the enclosure you will need:- original M2.5 screws from the aluminium frame - 4 pieces- M3 screws - 2 pieces- brass Heat Set Inserts M2.5 - 4 pieces- brass Heat Set Inserts M3 - 2 piecesIn addition, brass Heat Set Inserts M3 - 2 pieces are provided for mounting the case to some bracket. To make the first print of the case match the PI I recommend calibrating the prints on the printer using the advice of @SteveHanov, I recommend the link:https://makerworld.com/en/models/1291942-calibration-orcaslicer-bambustudio-print-profile CONCLUSION💚💚💚If you enjoyed the project please like it.💚💚💚Post your mak