Organic Tweel

This is a light weight organic structured airless tire (Tweel) similar to that of a sponge
it is intended for dual extrusion but could be printed all in TPU with high enough infill to prevent the Hub from flexing.

**Settings:**
**Print Setting (Hub):**
Material Used...................**PLA**
Layer Height ...................0.2 mm
Wall Thickness.................0.8mm
Printer Used ................... Raise3D E2
Extruder/Bed Temp..........210/60
Top/Bottom Thickness.....0.8mm
Mass ................... ...........48grams Combined
Print time ................... .... 517 min Combined
Infill Density................... .15%

**Print Setting (Tire):**
Material Used...................**TPU**
Layer Height ................... 0.2 mm
Wall Thickness.................0.8mm
Printer Used ................... Raise3D E2
Extruder/Bed Temp..........235/60
Top/Bottom Thickness......0.8mm
Mass................... ............48grams combined
Print time................... ....