Ornamental Heart Sculpture

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.    Printing the figurine itself isn't too hard, but depending on the scale, removing and cleaning the supports can be time-consuming. They definitely won't come off with a single pull :) You'll need to take your time and use tweezers and flush cutters. I recommend using Matte material – the supports come off much easier.     Print Difficulty level: [7/10]   [ Suggested Print Setup for 13 cm figurine ] - You can scale it up or down as desired. Nozzle: 0.4mm Layer Height: 0.2mm ( You can adjust the layer height based on how much detail you want )  Infill: 10-20% Wall loops: 3-4 Supports: Tree (auto) Printed with: PLA Black + Paint   These photos are real and show an actual 3D-printed figure photographed by me.   As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.