OSU! Mechanical Keyboard (Pro Micro)

A 2% Mechanical Keyboard, designed for the game OSU!.Splitted in 2 parts for easier printing. The supported board is a Pro Micro clone. Feel free to use a foamy 2-sided tape to keep it firm.Can be used with the cable facing both ways, you just have to arrange the pins when you build the firmware. BOM:- Arduino Pro Micro-1N4148 Diodes x2-M3x16mm Bolt Head Screws Files for flashing QMK can be found in my GitHub repoIf you need any help flashing or building the firmware feel free to ask.v2:-added a hole for reaching GND & RESET pins if you want to re-flash.-added a fillet inside so you can pry off the Pro Micro if glued to the bottom.