Otter Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 1.92mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Brown At layer #15 (1.28mm) swap to Ivory White At layer #22 (1.84mm) swap to Turquoise for the rest.