Thingiverse
Outlet finder
von stefanbergh
6
Downloads
1
Likes
0
Makes
I needed to make some holes in the back of a couple of cabinets for the outlets behind and didn't wanted a quick and easy way of doing it so I made this magnetic outlet finder.
It should work with most common European outlets (Type F).
Besides the printed parts you need 8 strong magnet (8 mm) so the pieces can find each other.
With the "finder" part you can mark the center of each well and the center of the outlet it self.
I use a 68 mm hole-saw in the center of each well and made a nice little frame to cover the edges up.
It should work with most common European outlets (Type F).
Besides the printed parts you need 8 strong magnet (8 mm) so the pieces can find each other.
With the "finder" part you can mark the center of each well and the center of the outlet it self.
I use a 68 mm hole-saw in the center of each well and made a nice little frame to cover the edges up.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!