Overoptimized Internal Y Splitter for H2D/S

Designed specifically for the H2D/S to link the TPU feed to the main filament feed to the right nozzle. This splitter has been designed to minimize filament feed resistance, footprint, and complexity while maximizing reliability. More on how at the very bottom. Special thanks to @JustMeSteve for providing feedback Disclaimer: Please make sure to test the full range of the toolhead's motion after you've attached the Y Splitter. It is possible that the Y Splitter may impede the toolhead's motion as it moves to certain regions within the chamber if it is located too close to a guide clip. Update: I've been hand feeding some more TPU into it and have experienced some issues with getting it through the splitter. Will publish a v2 it when I have more time. Materials 3x PTFE connectors (these are the same ones used by BBL). They can be found here: https://www.aliexpress.us/item/3256809383717930.html?gatewayAdapt=glo2usa4itemAdapt https://a.co/d/7D5DZtF (Optional) Superglue or epoxy. I persona