Owl (HueForge)

Project: owl.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Scarlet Red At layer #10 (0.88mm) swap to Yellow At layer #12 (1.04mm) swap to Ivory White for the rest. Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Boost MeDo you like my model?Then I would be very grateful for your support with a free boost token. Thank you very muchGefällt Ihnen mein Modell?Dann würde ich mich über eine Unterst