Ozzy HueForge

Project: ozzy ueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 197.29x253mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA PolyLite Purple Transmission Distance: 0.5PLA Ender Red Transmission Distance: 5PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to PurpleAt layer #13 (1.12mm) swap to RedAt layer #16 (1.36mm) swap to OrangeAt layer #19 (1.6mm) swap to YellowAt layer #24 (2mm) swap to White for the rest.