P1/P1S Lamp

Hello there, this Lamp utilize the on-board usb plug (located inside, behind the display), the open Hole and the Bambulab LED Lamp Kit.As you can see, there is no visible wiring , because it happens inside of the P1/P1S and the printed Part.How too, you`ll see in the following Picture description: Disclaimer: You have to cut Cables of the LED Lamp Kit and re-solder them, so make sure, you have everything for this: Klipper, Soldering-Iron, Cable Stripper, Exacto KnifeAt some Point, because of the wiring to the P1/P1S, you have to solder locally on top of the Printer, so make sure you either cover and prep this beforehand. Also before you Plug anything, make sure device is turned off and cable is unplugged. Also for testing a powerbank would be neededI take no responsibility, for you, messing up such an easy taskHow To: Start (obviously) with Printing the Part, after that, you turn off the Printer and UNPLUG itPrep the LED Lamp Kit( unscrewing, desoldering the connection inside the Lamp)