P1S Chamber Temperature Sensor

P1S Chamber Temperature Sensor I introduce my project of a thermometer case. The main reason for it, is to control the temperature of the chamber. Project info: It is made of PLA Basic. I was using this for a long time and I didn't notice any issues with it, even during printing materials which needed high bed temperatures like 100°C (during printing with bed heat up to 100°C, the temperature was around 48-49°C) even with long prints of high temperatures I didnt see any issues. The case is printed with a support structure from PETG. I recommend using glue to improve the quality of the model. For the sensor I used a Digital Thermometer TPM-10 (picture below) I used doublesided tape to mount the thermometer on the enclosure of the printer. During printing PLA temperature is around 32-34°C. I didn't notice any issues with the sensor to fall out, but you can use a bit of hot glue to make sure it stays in place. Boost Me