P1S Screen Mount - Flat

Here is my P1S “Flat” Screen MountMy P1S screen sits pretty much at eye level when I'm sitting in front of the machine, and I always have a hard time with glare from my ceiling fan light anytime I have it on and need to look at my screen. I didn't find anything that I liked to put the screen where I wanted, so I made my own screen mount that makes the screen point straight forward.Assembly:Turn your machine off! Slide the stock screen mount to the right to remove it. Next, unplug the cable from the back of the screen. Remove the two screws from the back of the screen and carefully lift the back away from the screen. Be careful as to not break the tabs that are on the end opposite the screws. If they break, you will probably have issues reinstalling your stock mount if you ever choose to do so. Next, use a hobby knife to remove the sacrificial bridging in the holes on the new mount. Insert the mount, tabs first, into the back of the screen and it should click into place. Install