P1S UPGRADE! Nozzle Testline Fix

P1S Nozzle Testline FixIn my last prints my Testline stucked at the Nozzle and going to the First Layer of my Print. Sometimes it ruined my first Layer so i have to abort the Print. Just download the File and Print the Cube for Support the FixTo fix this Problem just Edit your G-Code: Click on this Symbol And enter the following G-Code here: Here is the Difference: Standard: Nozzlefix: Here is the G-Code: ;===== machine: P1S ========================;===== date: 20231107 =====================;===== turn on the HB fan & MC board fan =================M104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzleM710 A1 S255 ;turn on MC fan by default(P1S);===== reset machine status =================M290 X40 Y40 Z2.6666666G91M17 Z0.4 ; lower the z-motor currentG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbedG380 S2 Z-25 F300 ;G1 Z5 F300;G90M17 X1.2 Y1.2 Z0.75 ; reset motor current to defaultM960 S5 P1 ; turn on