P1S/X1C Yi Camera Mount

Had to redraw the whole thing and adapt a different mounting for the Yi Home Camera.Added some extra rectangular indent for ease of attaching blue tack or vhb tape for secure mounts Print SettingsLayer Height: 0.2mmWalls: 3Infill Density: 15%Supports: Not necessary, but recommended at the area highlighted in the description.Material: ABS/ASA recommended. PETG may work but may flex without additional adhesive. PLA is not recommended as chamber heat may cause deformation.Color: Black filament is suggested to prevent reflections in the camera feed.Required Parts2x M3x8mm Screws(Optional) Blue Tack – Helps reduce vibrations against the door.(Optional) TapeAssembly InstructionsDisassemble the Yi Home camera by removing it from its included mount.If applicable, detach the ball joint by removing the rubber stopper and unscrewing it.Pre-route the cable by inserting the camera into the mount and plugging in the cable. Tape can help secure the cable in place.If using Blue Tack, apply a thin stri