P2S Exhaust Filter

Add-on exhaust filter for the Bambu Lab P2S that uses the previously unused left air channel.The fan box plugs in where the original flap sits and pulls the air through an 80×40 mm HEPA filter and a carbon cartridge. FeaturesUses the original left air channel of the P2S – remove the flap, plug in the fan box.Two 40×40 mm fans (3D-Models for 10 mm, 20 mm and 28 mm fan height available).Filter stack consisting of:80×40 mm HEPA filterCarbon cartridge filled with loose activated carbon granulate.Fans are connected to the P2S mainboard:Can be controlled through the printer display, Bambu Studio, or G-code / filament profiles.Carbon cartridge can be pulled out from the top, HEPA filter is mounted in the lid.Lid is held in place with print-in-place latches, no additional screws required.Bill of Materials (BOM)Fans (2 × 40×40 mm)I would recommend a fan with the following features so that it can be controlled via the printer, but any fan will work as long as the size is correct. 2 × 40×40 mm, 2