p407 servo holder

To get rid of the long push rod from the original servo mount,i made this thing.
It is designed to be put inside the front plate on the car,between the chassis rails,simply undo the two screws on both sides and place it inside and redo the screws,it replaces the nuts on the inside.If you want to use the original bumper you must drill thru the two top front holes with a 2,5mm drill before you put the bumper back on.
Undo the steering arm(2mm bolts)on the left and move to the right side and make a new push rod to the servo,i reused the original servo and servosaver but you can use any standard size servo for the job.
You also have to move the shocks to the rear position(see pic) to clear the new push rod.