Thingiverse
Paint Brush Holder
door BeAMaker
459
Downloads
332
Likes
1
Makes
*** Laser Cutting Project ***
This is my first project and my first contribution on this site. So do not hesitate to share your comments about the project and the files provided.
I realized this project to learn Fusion 360 so I model the brush support in this software. It is parametric design concerning the holes and the thickness of the selected material. If anyone wants to see or get the Fusion file, you can find it here: http://a360.co/2DCMp9T
The brush holder is 90 mm in diameter and 200 mm high. Large holes have a diameter of 10 mm and small holes of 7 mm. The material I used for this project is 3 mm birch wood. It is easy to change the size of the various holes as needed even from the PDF document. The middle circular piece is maintained simply thanks to the press fit. Personally, I fixed it with hot glue under the panel. to the support panels.
This is my first project and my first contribution on this site. So do not hesitate to share your comments about the project and the files provided.
I realized this project to learn Fusion 360 so I model the brush support in this software. It is parametric design concerning the holes and the thickness of the selected material. If anyone wants to see or get the Fusion file, you can find it here: http://a360.co/2DCMp9T
The brush holder is 90 mm in diameter and 200 mm high. Large holes have a diameter of 10 mm and small holes of 7 mm. The material I used for this project is 3 mm birch wood. It is easy to change the size of the various holes as needed even from the PDF document. The middle circular piece is maintained simply thanks to the press fit. Personally, I fixed it with hot glue under the panel. to the support panels.
BeAMaker publiceert ook op
10 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!