Paint Pot Holder

NOTE: I'm moving all my designs (slowly) over to PrusaPrinters.org. This design is now maintained and updated at

https://www.prusaprinters.org/prints/96050-paint-pot-holder

Thanks!

-- Leif



Inspired by the Citadel pot holders, these are sized for their paint pots. It's a fairly tight fit, intentionally.

2021 Update: I made a new set of pot holders, with a few changes

* Changed the border walls to be 2.4mm. This works nicely with both 0.4mm nozzles but also 0.6mm nozzles.
* Reduces the bottom thickness to 1.2mm (so, 6 layers at 0.20mm)
* Slightly taller walls
* Added the 6-, 7-, and 10-pot designs, for more options.

I like printing this with TPU, Overture TPU works nicely at 228 degrees / 50 degrees and 2.5-3 mm^3/sec volumetric speed.