Thingiverse

Paint Shelf

by Bou_Studio

4 Downloads

2 Likes

0 Makes

Fitsr model made for 3D printing !
Little rough but i like it! .
I made a shelf because all the shelves i saw was wayy too big and took wayy too mutch time because of the fully filled core. So i made one and removed all the unimportant bits and put it upright si it can be printed without any support like i did ! took me 14 hour to make with a ender 3 :)

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

14 h

Post-processing

Painting

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Paint Shelf need supports when printing?

Yes, Paint Shelf will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Paint Shelf?

According to the design notes, Paint Shelf takes approximately 14 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Paint Shelf available in?

Paint Shelf is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Paint Shelf free to download?

Yes, Paint Shelf is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Paint Shelf

Similar Models

Add to Collection