Thingiverse

Paint Tray

by Lilian_94

7 Downloads

3 Likes

0 Makes

The tray is about 10 cm x 4cm x 1 cm.
Each wel is 2cm in diameter and 1cm deep.

In this size with the described settings it takes about 1h to print and takes up 14g of filament.

Print settings:

Rafts: no
Supports: no
Resolution: 0.2
Infill: 10%

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Post-processing

Painting

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Paint Tray need supports when printing?

No supports needed for Paint Tray — it's designed to print clean off the bed.

How long does it take to print Paint Tray?

According to the design notes, Paint Tray takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Paint Tray available in?

Paint Tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Paint Tray free to download?

Yes, Paint Tray is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Paint Tray

Similar Models

Add to Collection