Pancake Coaster - Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 106.95x104.18mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Overture Yellow Transmission Distance: 9.7 PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Charcoal At layer #15 (0.72mm) swap to Brown At layer #22 (1mm) swap to Orange At layer #24 (1.08mm) swap to Yellow At layer #29 (1.28mm) swap to White for the rest.