Thingiverse
Engineering
Go to Model
Pancake Padlock
10
Downloads
9
Likes
0
Makes
This is my 3d printable variation on the famous 6 lever Champion pancake lock.
It uses real springs from a generic springs set off Aliexpress. The springs used are:
1 Compression 23/64" X1-3/8" for the shackle
2 Compression 1/4" X13/32" for the levers
If you print the V1 version of the body you will also need 3 16x4mm rods as the axes of the levers and the blocker. IMHO it looks nicer with those but if you don't want to mess with steel rods you can print the V2 version which uses 3d printed axes, it works just fine.
It uses real springs from a generic springs set off Aliexpress. The springs used are:
1 Compression 23/64" X1-3/8" for the shackle
2 Compression 1/4" X13/32" for the levers
If you print the V1 version of the body you will also need 3 16x4mm rods as the axes of the levers and the blocker. IMHO it looks nicer with those but if you don't want to mess with steel rods you can print the V2 version which uses 3d printed axes, it works just fine.
zbzzn also publishes on
21 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
