Panda HueForge

Picture source/author: @hanzo.ai.art / HanzoAI Model is 150x200 mm in size. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:PLA Elegoo+ Black Transmission Distance: 0.3PLA BambuLab Basic Orange Transmission Distance: 4.8PLA Elegoo + Gray Transmission Distance: 3PLA Elegoo Matt White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to OrangeAt layer #11 (0.96mm) swap to GrayAt layer #17 (1.44mm) swap to White for the rest.