Panda Touch Support Remix Updated Features

This is a remix of the Panda Touch support created by Patrick for the maCyo42 AMS V2 riser. If you don't have the maCyo42 V2 AMS riser go to the original file and print this one which works without it. I wanted to have threaded inserts for attaching the Panda Touch. This design allows the use of threaded inserts available on Amazon. I also changed support settings for easier removal. I highly recommend getting M3x8 flat screws to allow better thread engagement for the brass inserts. The top original screws that came with the Panda Touch only allow 1mm of thread engagement so I replaced mine with M3x8 screws listed in the parts below. The model without threaded inserts will need M3x10 screws to allow good thread engagement. You can find them in the parts list at the bottom of the page or source them locally. My model was printed in green and black ABS using a 1mm color change. I tried less than 1mm but got bleed through from the other color. Both models are set up as 2 tone but you