Slicer Discord
3DSEARCH / Sport & Outdoors / Parallettes - PushUpBar - Minibarren
Parallettes - PushUpBar - Minibarren – 3D printable model from MakerWorld MakerWorld
Sport & Outdoors

Parallettes - PushUpBar - Minibarren

by 3D Druck Johann · Sport & Outdoors
42 Downloads
24 Likes
19 Makes
Go to Model
In order to protect my wrists during push-ups, I quickly designed these push up bars (Parallettes). The broomstick, i had lying around, has a diameter of 28.35mm.The hole diameter of the 3d model is 28.2mm. I used a rubber mallet to attach the 3d printed parts to the wooden rod.No screws are needed.There is a test ring to check the tolerances. The model also has a reinforcement on the inside and rubber feet made of TPU.
Category
Sport & Outdoors
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
TPU, Wood PLA
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
parallettes / Push-Up Bar
parallettes / Push-Up Bar
by kashimakun67
↓ 7 ♥ 3
Pushup Parallettes with TPU antislip feet
Pushup Parallettes with TPU antislip feet
by vllmu55
↓ 6 ♥ 4
Pushup Parallettes high version
Pushup Parallettes high version
by Scruffy
↓ 3 ♥ 2
Parallettes /Push-Up Handles / Handstand Bar
Parallettes /Push-Up Handles / Handstand Bar
by Fukken
♥ 1
Parallettes
Parallettes
by thornjakobsen
↓ 9 ♥ 1
Push Up Bars / Parallettes with Thick 40mm Handles
Push Up Bars / Parallettes with Thick 40mm Handles
by Antipode
↓ 14 ♥ 1
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection