Thingiverse
Household
Go to Model
Parameterized Power Strip Mount
1.7k
Downloads
1.2k
Likes
2
Makes
This is a fully parameterized mount for power strips.
I found some designs here, but none fitted the strips I had at home.
The `.3mf` file provided is just an example, and will fit a power strip with the following dimensions (the one you can see in the pictures):
Width: 53mm
Height: 41mm
To customize, you will need [OpenScad](https://openscad.org/) and the dimensions of your power strip (just measure them but account for a little clearance, .5mm worked for me). Then get the `.scad` file, open it and fill in your dimensions at the top. Make sure the mount is not to wide, so it will not cover any power sockets and make sure the power cord will fit through the hole (there are parameters for those dimensions, too). All dimensions are in millimeters.
I found some designs here, but none fitted the strips I had at home.
The `.3mf` file provided is just an example, and will fit a power strip with the following dimensions (the one you can see in the pictures):
Width: 53mm
Height: 41mm
To customize, you will need [OpenScad](https://openscad.org/) and the dimensions of your power strip (just measure them but account for a little clearance, .5mm worked for me). Then get the `.scad` file, open it and fill in your dimensions at the top. Make sure the mount is not to wide, so it will not cover any power sockets and make sure the power cord will fit through the hole (there are parameters for those dimensions, too). All dimensions are in millimeters.
jodoll also publishes on
15 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
