Thingiverse
Parametric Christmas Tree Light
par bobm123
95
Téléchargements
64
Likes
0
Makes
A parametric Christmas tree / tea light generator.
User can set the number of branches per layer and
a smoothness factor along with a base diameter. The
model is intended to print as a 'spiral vase' with
0 layers on the bottom to slip the tea light into.
Adjust the number of branches and their 'spikiness'
to taste and adjust the base diameter to match your tea
lights (LED of course!). Mine measures at about 38-mm
but needed a little slop to account for spiral vase
calculations and nozzle spooge. I suggest you print
1-mm oversize and adjust with some masking tape for
a snug fit.
The mathematical bits are based on Marius Kintel's
list comprehension demos, specifically the 3rd body
generated by the superformula.scad script here:
https://github.com/openscad/list-comprehension-demos
Enjoy!
Bob M, December, 2017
User can set the number of branches per layer and
a smoothness factor along with a base diameter. The
model is intended to print as a 'spiral vase' with
0 layers on the bottom to slip the tea light into.
Adjust the number of branches and their 'spikiness'
to taste and adjust the base diameter to match your tea
lights (LED of course!). Mine measures at about 38-mm
but needed a little slop to account for spiral vase
calculations and nozzle spooge. I suggest you print
1-mm oversize and adjust with some masking tape for
a snug fit.
The mathematical bits are based on Marius Kintel's
list comprehension demos, specifically the 3rd body
generated by the superformula.scad script here:
https://github.com/openscad/list-comprehension-demos
Enjoy!
Bob M, December, 2017
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !