Thingiverse

Parametric Concealed Hinge Marking Jig

von bjin3d

57 Downloads

38 Likes

0 Makes

Simple but extensive parametric marking/pilot hole drilling jig for euro-style concealed hinges with a "cross-style" mounting clamp.

**NOTE: The attached STL for Hettich 8645i Inset is a sample and configured to my specific situation as used in the default parameters. Use the F3D Fusion 360 file for configuration.**

Configurable parameters
- Pot size (35mm default). Not practically used in the final design.
- Vertical distance between pot and screw holes (5.5mm default)
- Horizontal spacing between screw holes (52mm default)
- Distance to door edge (4mm default)
- Reveal size, ie. gap between case and door (0.6mm default). Used as spacer between door and case/frame.
- Material thickness of door for inset hinges (18mm default, set close to 0 or remove if using overlay style hinge)
- Distance between door or edge to cross-style clamp (37mm default)
- Spacing of cross-style clamp (32mm default).
- Pilot hole size for selfcentering drill bit (2.2mm default)

Blum concealed customizable Drilling jig Drill Template fusion360 fusion 360 hafele hettich hinge Jig marking markingjig marking tool parametric template Blum concealed customizable Drilling jig Drill Template fusion360 fusion 360 hafele hettich hinge Jig marking markingjig marking tool parametric template

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat