Parametric Enclosure based on Openbuilds Modular Enclosure System

10/17/2020 Update
In **Enclosure_Rev9.scad** added option for 2020, 2040 or 2060 Door headers since Openbuilds changed their design to use 2060 for the door header. For smaller enclosures you might not need that, so added the 3 options.
For this option set: **Hd_Size = 60; //20, 40 or 60**

Also added option for 3 or 4 joining plates on the door.
For this option set: **JP_Qty = 4; //Set to 3 or 4**

The spreadsheet **VariableModular_Enclosure_V3.xlsx** was also updated by adding the variable line:
Door Header Z Height Size (20, 40 or 60)
This really only affects the cut lengths of Door Vertical Lengths & Door panels.

This is a parametric openscad program to show different size configurations of the Openbuilds Enclosure system which can be found here: https://openbuilds.com/builds/openbuilds-enclosure-series.9535/ There is also a spreadsheet that will give you all the cut sizes. The calculations used here are based on their 3 different configurations & I have not create