Thingiverse
Parametric Ikea Lack Bottle Holder
by Pepelope
2
Downloads
4
Likes
0
Makes
I created a simple bottle holder for the Ikea Lack table. The holder attaches to the leg of the table with 3 screws (I used 4x10mm).
The size is adjustable, by opening the f3d file in Fusion 360 and changing the parameter “Bottle_Diameter”. When adjusting the parameter, add about 1mm over the size of the bottle.
The parameter “Height” adjust the internal height of the holder.
The size of the provided STL model is 47.5mm, which is perfect for a bottle from hair dye, that I use for isopropanol for cleaning the bed of my printers.
The size is adjustable, by opening the f3d file in Fusion 360 and changing the parameter “Bottle_Diameter”. When adjusting the parameter, add about 1mm over the size of the bottle.
The parameter “Height” adjust the internal height of the holder.
The size of the provided STL model is 47.5mm, which is perfect for a bottle from hair dye, that I use for isopropanol for cleaning the bed of my printers.
Pepelope also publishes on
7 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
