Parametric Photo Frame

Update: V2Thanks to some constructive feedback, I have adjusted the model to allow for an offset to the back plate to allow the framed item to be held in place when there is no border to it. so if you have a photo that is 60mm by 90mm you can choose to cover a few mm on each side to hold it in place. Update 2: V3I have added a stand feature to the back plate. The cylinders that come off the back plate should act as a stand. I have not been able to run a test print yet however to see how well it works. Will update this once I can get a test done or someone can verify. Update 3: V4I removed the old stand and created a new standalone stand that you can choose to include. I have also allowed for holes to be added to the frame for the frame to sit on screws. As expected all these can be adjusted. Please note, This is still a learning curve for me and as such, the stand angle will need to be a negative number to work. This is my first parametric model and I learned a lot making it. I have id