Thingiverse
Parametric Rail Clamp
di Ashevar
42
Download
25
Likes
0
Makes
This is a parametric two piece clamp I designed to mount items to the various sizes of stainless steel tubing and railings on my sailboat.
For additional strength increase infill and/or use a piece of flat stock drilled to match the bolt holes on the side of the clamp.
Attached STL is for 1" tubing, 1/4" bolts, and no trap.
I can't get the customizer to work with my bolt dimension array variable so you will have to use the OpenSCAD file to do that yourself; values are in there for 1/4" to 3/4" bolts.
For additional strength increase infill and/or use a piece of flat stock drilled to match the bolt holes on the side of the clamp.
Attached STL is for 1" tubing, 1/4" bolts, and no trap.
I can't get the customizer to work with my bolt dimension array variable so you will have to use the OpenSCAD file to do that yourself; values are in there for 1/4" to 3/4" bolts.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
