Thingiverse

Parametric Shaft Coupling

von Griffin_Nicoll

361 Downloads

295 Likes

2 Makes

Similar to http://www.thingiverse.com/thing:7153 but many parameters. Defaults are a 5mm to 7.8mm shaft which is what I measured on my machine. I got rid of the cut on one side as that led to slightly uneven pressure inducing a bit of wobble. In this model you can change: shaft diameters, bolt sizes, washers (if used), nut traps, and overall dimensions. This will make a strong shaft coupling without using much plastic. The code also makes a cleaner stl then my previous coupling.

3D coupling customizer Customizer Challenge openscad parametric prusa reprap useful 3D coupling customizer Customizer Challenge openscad parametric prusa reprap useful

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat