Parametric Storage Box with Snap-on Lid

Fusion 360:

Change parameters for desired compartment dimensions. Add 1.5-2 mm if storing cards or tiles.
Set XY instance parameters from 1-15.
Increase/decrease tolerance parameter by 0.05-0.1 if lid is too tight/loose.

If model corrupts, try Compute All (Ctrl+B).


Slicer:

For Box - No solid bottom layers to save on time and filament.
For Lid - No solid top and bottom layers . Use cubic 21% (or similar strength) infill. About 6-9 perimeters for rigidity.

11/16/2023 - Bottom compartment curvature can now be set separately between X and Y.
11/28/2023 - Fixed corner rounding.
11/29/2023 - Removed patterns from workflow for compute stability. Added some parameter constraints.