Parametric Whoop Canopy

A parametric whoop canopy. Instances for BETAFPV C03 and HDZero Lux cameras included. Camera angle, Z offset, as well as most dimensions, are parametric. Mounting holes use M1.4-M1.6 nuts. Made with OpenSCAD.

**GitHub:** https://github.com/vsergeev/3d-parametric-whoop-canopy

**Base Designs**

* [`canopy.scad`](https://github.com/vsergeev/3d-parametric-whoop-canopy/blob/master/canopy.scad) - Canopy

**Instances**

* [`betafpv_c03_26x26_canopy.scad`](https://github.com/vsergeev/3d-parametric-whoop-canopy/blob/master/betafpv_c03_26x26_canopy.scad) - BETAFPV C03 Camera Canopy with 26mm mounting holes (weight 2.6g ASA)
* [`hdzero_lux_26x26_canopy.scad`](https://github.com/vsergeev/3d-parametric-whoop-canopy/blob/master/hdzero_lux_26x26_canopy.scad) - HDZero Lux Camera Canopy with 26mm mounting holes (weight 2.8g ASA)

**Recommended Print Settings:** ASA / PETG / Hard TPU, 0.20mm layer height, 100% infill. Print with no supports and 2 layer raft to prevent warping, or with supports under c