Parkflyer Interloper

This copter could be named as the Beefy Brother of the Parkflyer 400 GT https://www.thingiverse.com/thing:2338528
It got a double side battery compartment to connect two 3S LiPo parallel to 6S LiPo.
So you'll have a balanced copter and 25.2 Volts power.
Lift-off weight with FPV system and full setup approx. 1000 g, watch the video and see the punch.

The "impact guard" has to be glued together. You also have to do some small gluing at the motor mount.

Parts can be found here soon: https://www.parkflyer.eu/store/
The building instructions: https://www.parkflyer.eu/2017/12/17/construction-manual-parkflyer-interloper/.


Recommended set up:
1650 KV Motors
35 A ESC
6s LiPo (2 x 3S LiPo) 2450 mAh
7" Propeller

Screw-Set Frame:

M3 x 50 mm Hex Screw, 11 pcs.
M3 x 10 mm Rivet Nut Aluminium, 11 pcs.
M3 x 30 mm Hex Screw, 8 pcs.
M3 Lock Nut, 8 pcs.
Flat Washer for M3 Screw, 27 pcs.

Motor mount:

M3 x 25 mm Hex Screw, 16 pcs.
M3 x 20 mm