Slicer Discord
Parrot Perch – 3D printable model from MakerWorld MakerWorld
Pets

Parrot Perch

132 Downloads
66 Likes
77 Makes
Go to Model
We tried a few purchased perches but none of them were really strong enough and the parrot did not feel stable.Well he does now :)I've also included 3 holes in the bottom for 30mm x 10mm x 3mm magnets if required. If you want to stop the perch sliding on smooth surfaces, I strongly recommend purchasing something like thishttps://www.amazon.co.uk/mayshine-Non-Slip-Underlay-Multipurpose-Surface/dp/B0796RCN5P/ref=pd_rhf_se_s_pd_sbs_rvi_d_sccl_2_12/258-4841643-5551341?pd_rd_w=Uc2kP&content-id=amzn1.sym.0f49b2d0-6326-4aee-911a-a977f4ca7c12&pf_rd_p=0f49b2d0-6326-4aee-911a-a977f4ca7c12&pf_rd_r=RWRN4SWNNCASA61K6B8Z&pd_rd_wg=aesGY&pd_rd_r=89097e03-4f2d-47a6-8dd4-894e24f87670&pd_rd_i=B0796RCN5P&th=1I used contact adhesive to stick it on. The magnets are strong enough to stick with the non slip mat attached.
Category
Pets
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
significant post-processing
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 3/3
Printer
FDM / FFF
File format
STL
Material
ASA
Post-processing
Sanding, Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection