Thingiverse
PBS-1 Suppressor
par Russian_Airsoft
19
Téléchargements
24
Likes
0
Makes
A mock version of the PSB-1 suppressor, it can be slid onto the muzzle brake of a AK-74m. While this is meant for Airsoft more specifically a CYMA AK-74m, I have not tried it on a real AK-74m. If you are using it for anything other than a CYMA AK-74m and it does not work feel free to edit the 3d model to make it work.
Other than looking cool it can also be retrofitted to fit foam on the inside to make your AK less loud making you an absolute force to be reckoned with on the field.
Height: 210 mm
Diameter: 50mm
weight: 2.9 oz
In order to assemble you will need strong glue and a rod, you can use to help align the two halves. The cap at the end can be popped off and should stay there well. To take it off, just pry it off using something like a pencil or pen.
When you first slide it on it will be very tight but as you do it more and more it should loosen up a bit and make it easier to put on or take off.
Other than looking cool it can also be retrofitted to fit foam on the inside to make your AK less loud making you an absolute force to be reckoned with on the field.
Height: 210 mm
Diameter: 50mm
weight: 2.9 oz
In order to assemble you will need strong glue and a rod, you can use to help align the two halves. The cap at the end can be popped off and should stay there well. To take it off, just pry it off using something like a pencil or pen.
When you first slide it on it will be very tight but as you do it more and more it should loosen up a bit and make it easier to put on or take off.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
