Thingiverse
PC Mouse Pad
door zacharc
2
Downloads
0
Likes
0
Makes
PC Mouse Pad:
This is a simple model with a height of 0.6 mm, which can sometimes come in handy…
There are two versions:
- 230x230 mm (For Creality bed size).
- 245x205 mm (For Mk4 bed size).
------------------------------------------------
Print Settings:
Material - PLA, PETG
Bed - Textured PEI plate*, 3DLack
Flow rate - 0.99 (99%)
Layer height - 0.2 mm (3x layer of 0.6 mm)
Support - No
Skirt, Brim - No, No
Print Speed - 35-40 mm/s
Benefits of printing:
- Mesh bed leveling
- Z tilt adjust / Level bed corners
-------------------------------------------------
*Note: For PC mouse laser optics, you must print on a textured plate, a smooth plate (or top surface) does not work so well.
This is a simple model with a height of 0.6 mm, which can sometimes come in handy…
There are two versions:
- 230x230 mm (For Creality bed size).
- 245x205 mm (For Mk4 bed size).
------------------------------------------------
Print Settings:
Material - PLA, PETG
Bed - Textured PEI plate*, 3DLack
Flow rate - 0.99 (99%)
Layer height - 0.2 mm (3x layer of 0.6 mm)
Support - No
Skirt, Brim - No, No
Print Speed - 35-40 mm/s
Benefits of printing:
- Mesh bed leveling
- Z tilt adjust / Level bed corners
-------------------------------------------------
*Note: For PC mouse laser optics, you must print on a textured plate, a smooth plate (or top surface) does not work so well.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
