Thingiverse
PCB camera lens mount
door KeriL
8
Downloads
6
Likes
0
Makes
Layer 0.1mm, Nozzle 0.3, 25% infill, PLA
I had a heavy-metal camera in the drone. I removed the panel and I printed a lens holder added to make it easier.
The thread of 12mm diameter and 0.5mm metric pitch. As should fit very accurately, 0.1mm increments uploaded increasing the number of threads in diameter.
Plus 0.4mm fits me the best, but it depends on the printer.
Should you use thread-locking adhesive after adjusting the focus.
Two metric screw M2 * 8 to be putting together.
Necessary black material used to reduce internal reflection.
In reality it looks much better. :)
I had a heavy-metal camera in the drone. I removed the panel and I printed a lens holder added to make it easier.
The thread of 12mm diameter and 0.5mm metric pitch. As should fit very accurately, 0.1mm increments uploaded increasing the number of threads in diameter.
Plus 0.4mm fits me the best, but it depends on the printer.
Should you use thread-locking adhesive after adjusting the focus.
Two metric screw M2 * 8 to be putting together.
Necessary black material used to reduce internal reflection.
In reality it looks much better. :)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!