Thingiverse
PCB Solder Stencil Paste Jig
von dustyman1290
14
Downloads
16
Likes
0
Makes
This PCB solder stencil jig can accommodate PCBs up to 68mm X 102mm.
Assembly requires a few M3 nuts and bolts (4 of each). Simply bolt the top shoulder to the base plate. If using PCBs thicker than 0.8mm, you can print a series of 0.2mm thick spacers (or whatever thickness you need) and insert them between the base plate and top shoulder. Install the corner and/or straight supports in the required position to support the PCBs while applying paste.
I use tracing paper/vellum cut with a desktop laser CNC, which works great with this jig.
Assembly requires a few M3 nuts and bolts (4 of each). Simply bolt the top shoulder to the base plate. If using PCBs thicker than 0.8mm, you can print a series of 0.2mm thick spacers (or whatever thickness you need) and insert them between the base plate and top shoulder. Install the corner and/or straight supports in the required position to support the PCBs while applying paste.
I use tracing paper/vellum cut with a desktop laser CNC, which works great with this jig.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
