Peg Board

Could not find a fully printable pegboard so i made my own.

Pegboard is 128x128x13mm

Screw size : anything 2.5mm in diameter or smaller should fine, if you want to use a larger screw make sure you use 100 percent infill on the pegboard. Have not tested larger than 2.5mm but should be fine

Pegboard
-Infill : 15
-Supports - No

Pins for Pegboard
-Infill : 50-100
-Supports - no
-Use brim

Little drawer for both
-Infill : 25
-Supports - yes
-Use brim