Pegboard Spacers

Pegboard spacer to mount a pegboard to the wall. They should be placed approximately 30cm (~12") apart.

The spacer has an outside diameter of 17mm (~2/3"), the height is 17mm, and the inside diameter is 6mm (~1/4").

The pictures show a slightly larger outside diameter than the actual thing since they didn't need to be so large.

How to install: You may know a better way but this is what I did it and it worked well.

First mark an X every 12 holes by drawing a line between four holes starting with the first row, working across, then down. For the boards you see in the photos each one uses 15 spacers. The idea is to drill holes in-between the existing holes so you don't use any of them for mounting.

Position the board where it is to be mounted and drill in one screw over an X. Then use a level to make sure it's straight and drill in a second screw over an X on the other side. Now that the board is somewhat secure drill a hole over every X on the board.

Remove the pegboar