Pen Holder A1 / A1 Mini Plotter

This is a penmount designed for the Bambu Lab A1 mini and A1. It is designed as to not collide with any other printer parts so that it can remain attached when using the printer normally. It can be used for plotting PCB:s or just plotting a picture. Tip: Check pictures for guidence if the text isn't enough.Too much hardware? No problem here's a new version with way less hardware: New version BOM:5x - M3x10 screw1x - M4x20 screw5x - M3 nut1x - M4 nut2x - linear bearings for 8mm rod. Outer diameter = 15mm and length = 24mm2x - steel rods, 8x46mm2x - zipties1x - pullspring, 5x10mm - if you can't find a spring, use a rubberband instead. Print BOM:1x - zipholder4x - slidermount1x - screwknob1x - penholder1x - penmount Assembly:Insert all the nuts in their corresponding holes, force is needed since they are meant to be press fitted.Insert the bearings into the penholder, also press fitted.Insert the steel rods in the bearings and attach the slidermounts on the steel rods, also pr